2006 EMBROIDERY CORSET

 

You need: stiff satin, separating zip, metallic/plastic bones, lace appliqué/embroidery, fusing, cords for loops.

 

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

 

SEAM ALLOWANCES: 2 cm for middle back seam (to stitch the zipper). 1 cm for other seams

 

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (minimal width is 140 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES THEY MUST BE COINCIDING!

PLEASE KEEP BEAM THREAD DIRECTION.

 

CUTTING:

 

Satin:

1. All corset pieces. Use also as lining.

Fusing:

1. All corset pieces.

 

Lace/trimming: sew to ready front parts and bead by hands.

 

INSTRUCTIONS:

 

1. Set metal/plastic bones which are 2 cm shorter than seam length (to make sewing more comfortable) in bodice seams.

 

2. The zipper is in back middle seam.

 

3. Fastener: on the collar back, 2 small buttons and cord loops.