2007 TAILED SKIRT
You need: stiff satin, zipper of 20 cm length; fusing; lining.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 2 cm for back middle seam (to stitch the zipper) and skirt hem. 1 cm for other seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (minimal width is 140 cm) to find out how much material you need (do not forget about double and symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
PLEASE KEEP BEAM THREAD DIRECTION.
1. All skirt pieces
1. All facings
1. All lining pieces
1. The zipper is in middle back seam.
2. Sew skirt hem by hand (2 cm)
3. Apply the fusing to facing; stitch facing to skirt lining, then stitch skirt upper edge around.