FABRIC: light silk or cotton material (cambric).
YOU WILL ALSO NEED: elastic tape.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric pieces).
WHEN SEWING, BE CAREFUL WITH NOTCHES Ц THEY MUST BE MATCHING!
1.Half of the trousers Ц 2 pieces
1. Stitch the side/inside leg seams and press them open.
2. Put one half of the trousers inside the other one right sides together and stitch the central seam leaving a slit in the seam above the waist fashion line.
3. Fold the waist integrated facing to the wrong side and topstitch it to
the garment. Make two rows of stitches according to the marks. Cut 3 piece
of elastic to fit the waist, plus 2,5 cm. †Thread these pieces of elastic
through the casing. Overlap and stitch the elastic ends.
4. Fold the lower trousers edges under and topstitch them.