5259 RAGLAN DRESSING GOWN

 

FABRIC: THICH DOUBLE-SIDED SILK MATERIAL.

 

YOU WILL ALSO NEED: interfacing.

 

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

 

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric pieces).

 

WHEN SEWING, BE CAREFUL WITH NOTCHES THEY MUST BE MATCHING!

 

CUTTING:

Fabric:

1. Back 1 folded piece

2. Pocket 2 pieces

3. Front 2 pieces

4. Front facing 2 pieces

5. Cuff 2 pieces

6. Back sleeve 2 pieces

7. Front sleeve 2 pieces

8. Belt 1 folded piece

Interfacing:

4. Front facing 2 pieces

5. Cuff 2 pieces

 

INSTRUCTIONS:

1. Fold the top pocket self facing to the right side and stitch it to the side pocket edges. Turn this and all other allowances to the wrong side according to the pattern. Stitch the pocket top edge. Topstitch the pocket to the garment

 

2. Stitch the sleeves to the front/back pieces. Stitch the upper/underarm sleeve seams.

Stitch the side seams. Stitch cuffs side seams and stitch the cuffs to the sleeves.

 

3. Clip the seam allowances on the corners of the front pieces diagonally. Stitch the collar centre seam. Stitch the collar to the neckline. Press this seam open. Stitch the front facing centre edges. Stitch the facing to the garment (face to face) stitching along the lower/central edges and the collar. Turn the facing to the wrong side of the dressing gown. Tack and press the collar.

 

4. Press the hem to the wrong side and stitch in place.

 

5. Make up and topstitch the belt.